routing
30 Levels of NAT Lab #2 – Juniper SRX100s
Well, I had the chance again to play with lots of Firewalls, so I did. A customer had ordered > than 30 SRX100s for clustered branch deployments so I took the opportunity to ask for permission to pull 30 of them out of boxes and reproduce my 30 levels of NAT lab. It\’s never the […]
Juniper SRX Chassis Cluster RG0 Nagios Check
I was required to check (as this customer did not have a trap collector) which node was active for redundancy group 0 on a SRX cluster. So I thought I would check for a SNMP OID that is only presented by the active RG0 node. This script uses snmpwalk and is configured to use SNMP v2c […]