JUNOS AppSecure now on Branch SRXs

So application identification / firewall / secure has made it way to the branch. This is awesome news. So I have managed to obtain a 30 day trial to see how it performs on my home SRX100. With ym simple rule base I have seen 1ms increase in my latency!!

After adding the license you can now perform the following:

Install Application identification

request services application-identification download

Check the status:

• request services application-identification download status
  Application package 1980 is installed successfully.

Create a Application Ruleset

All that is ahppening here is youtube is BLOCKED, everything else is allowed.

[plain]
set security application-firewall rule-sets block-webtraffic rule youtube match dynamic-application junos:YOUTUBE
set security application-firewall rule-sets block-webtraffic rule youtube then deny
set security application-firewall rule-sets block-webtraffic default-rule permit
[/plain]

Add to a security policy:

There is now the 'application-firewall' settings to apply to policies ...

cooper@noona-gw# set security policies from-zone trust to-zone untrust policy trust-to-untrust then permit application-services ?
Possible completions:
> application-firewall  Application firewall services
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
gprs-gtp-profile     Specify GPRS Tunneling Protocol profile name
gprs-sctp-profile    Specify GPRS stream control protocol profile name
idp                  Intrusion detection and prevention
redirect-wx          Set WX redirection
reverse-redirect-wx  Set WX reverse redirection
> uac-policy           Enable unified access control enforcement of policy
utm-policy           Specify utm policy name

Example Policy:

[plain]
set security policies from-zone trust to-zone untrust policy trust-to-untrust match source-address any
set security policies from-zone trust to-zone untrust policy trust-to-untrust match destination-address any
set security policies from-zone trust to-zone untrust policy trust-to-untrust match application any
set security policies from-zone trust to-zone untrust policy trust-to-untrust then permit application-services application-firewall rule-set block-webtraffic
set security policies from-zone trust to-zone untrust policy trust-to-untrust then log session-init
set security policies from-zone trust to-zone untrust policy trust-to-untrust then log session-close
[/plain]

TODO: Play with 'application-tracking'. Will update blog post once I have.

So it's that simple ... Application firewalling is now accross the whole SRX range ... win.