SRX Branch Chassis Cluster Ports

Posted by cooper on May 12, 2012 in g33k, juniper |

Here is a table of the ports that are used for chassis cluster control link and management ports on Branch SRX devices.

The quoted ports are the ‘stand alone’ non clustered port names (not node1’s port names once clustered). In a SRX cluster the PIM slots on node1 start at the last PIM slot of node0 + 1. For example, a SRX240 cluster’s node1 starts at PIM 5. It’s control link port is effectively ge-5/0/1).

Model FXP0 (Management) FXP1 (Control Link)
SRX100 fe-0/0/6 fe-0/0/7
SRX210 fe-0/0/6 fe-0/0/7
SRX220 ge-0/0/6 (> 11.0) ge-0/0/7
SRX240 ge-0/0/0 ge-0/0/1
SRX550 ge-0/0/0 ge-0/0/1
SRX650 ge-0/0/0 ge-0/0/1

 *fab0 and fab1 interfaces (Data Link) are always configurable, e.g.:

  • set interfaces fab0 fabric-options member-interfaces ge-0/0/2
  • set interfaces fab1 fabric-options member-interfaces ge-5/0/2

Tags: , , , , , , , , , , , ,

Copyright © 2017 I-R-Coops Blog All rights reserved. Theme by Laptop Geek.