SRX Branch Chassis Cluster Ports

Here is a table of the ports that are used for chassis cluster control link and management ports on Branch SRX devices.

The quoted ports are the 'stand alone' non clustered port names (not node1's port names once clustered). In a SRX cluster the PIM slots on node1 start at the last PIM slot of node0 + 1. For example, a SRX240 cluster's node1 starts at PIM 5. It's control link port is effectively ge-5/0/1).

Model FXP0 (Management) FXP1 (Control Link)
SRX100 fe-0/0/6 fe-0/0/7
SRX210 fe-0/0/6 fe-0/0/7
SRX220 ge-0/0/6 (> 11.0) ge-0/0/7
SRX240 ge-0/0/0 ge-0/0/1
SRX550 ge-0/0/0 ge-0/0/1
SRX650 ge-0/0/0 ge-0/0/1

 *fab0 and fab1 interfaces (Data Link) are always configurable, e.g.:

  • set interfaces fab0 fabric-options member-interfaces ge-0/0/2
  • set interfaces fab1 fabric-options member-interfaces ge-5/0/2

Related Posts

Stop IPv4 Point-To-Point Addressing your Networks

IPv4 addressing on links is no longer required to route IPv4. What you say?? Yes, you can stop IPv4 addressing your point to point links with Legacy…

NAT64: Using `jool` on Ubuntu 20.04

I found that jool has very good tutorials, but all the commands to get going are hidden in these large tutorials. Here are the steps I took…

Raspberry Pi Powered Fireplace

Mr Aijay Adams and I am back making my Fireplace Internet / Smart device controllable. Now, via a very sexy Web UI, when I’m heading back to…

nftables

Are you using the latest Linux kernel firewall?. Here are some notes I’ve saved that I use and forget all the time. I plan to add to…

RPM vs OPKG Cheat Sheet

Recently in the Terragraph project I work on we changed from RPM to OPKG to removes some dependencies (e.g. perl) and make our overall image size smaller….

Ansible + Handy PyPI CLI Tools

I often use a lot of PyPI CLI tools. Here is an example of how to get them easily installed and kept up to date via Ansible…

Leave a Reply

Your email address will not be published.